Differences between version dated 2007-12-28 21:42:05 and 2007-12-28 21:45:07
Deletions are marked like this.
Additions are marked like this.
The Jumbo Machine Tool is basicly the JumboLathe with an extra axis .Overall it is 24 feet long(20 foot of travel for the X axis tool platform)by 8 foot high(6 foot of Z travel of the X axis beam) with a seperate 4 X 8 foot table that moves 6 feet in the Y axis on a 8 X 8 bed.
The Jumbo Machine Tool is basicly the JumboLathe with an extra axis .Overall it is 24 feet long(20 foot of travel for the X axis tool platform)by 8 foot high(6 foot of Z travel of the X axis beam) with a seperate 4 X 8 foot table that moves 6 feet in the Y axis on a 8 X 8 bed (the 2d pallet table shown below was an earlier design).
Here are some of the first cads I have been able to ruff together .I will eventualy offer plans and a build it yourself book with dvd ,I have about 20 hours of video of the making and operation of it but in such a crowded shop the cads offer a much better picture of the layout .
http://www.robotgroup.net/brooks/JumboMachineTool-1b.jpg
ShowText
of this page
EditText
of this page
FindPage
by browsing, searching, or an index
Or try one of these actions:
LikePages,
LocalSiteMap,
SpellCheck
